KTM Freeride E-XC NG 2018, Руководство пользователя

Страница: 70 / 151

13 SERVICE WORK ON THE CHASSIS
68
13.16 Removing the shock absorber
Preparatory work
–
Deactivate the vehicle. ( p. 43)
–
Fold the seat up. ( p. 69)
–
Remove the KTM PowerPack. ( p. 107)
–
Mount the covering cap. ( p. 71)
–
Raise the motorcycle with a lift stand. ( p. 57)
A00188-10
Main work
–
Remove screw
1
.
–
Remove screw
2
and lower the rear wheel with the swing arm
as far as possible without blocking the rear wheel. Fix the rear
wheel in this position.
–
Remove screw
3
.
–
Push the splash protector
4
to the side and remove the
shock absorber.
13.17 Installing the shock absorber
A00188-11
Main work
–
Push splash protector 1 to the side and position the shock
absorber.
–
Mount and tighten screw
2
.
Guideline
Screw, top
shock absorber M12 80 Nm (59 lbf ft)
Loctite ® 2701™
–
Mount and tighten screw
3
.
Guideline
Screw, bottom
shock absorber M12 80 Nm (59 lbf ft)
Loctite ® 2701™
Info
The heim joint for the shock absorber at the swingarm
is Teflon-coated. It must not be greased with grease,
nor with any other lubricants. Lubricants dissolve the
Teflon coating, thereby drastically reducing the service
life.
–
Mount and tighten screw
4
.
Guideline
Screw, upper
subframe M10 45 Nm (33.2 lbf ft)
Loctite ® 243™
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 57)
–
Install the KTM PowerPack. ( p. 108)
–
Lock the seat. ( p. 69)