KTM Freeride 350, Руководство пользователя, Страница: 48 / 113

SERVICE WORK ON THE CHASSIS
46
–
Remove the air filter housing. x ( p. 45)
B01062-10
Main work
–
Take off pre-filter
1
.
–
Open air filter housing
2
and take out air filter
4
with air filter support
3
.
–
Take off air filter
4
from air filter support
3
.
10.23
Installing the air filter
x
B01063-10
Main work
–
Mount the clean air filter onto the air filter support.
–
Apply grease to the air filter around area
A
.
Long-life grease ( p. 105)
B01064-10
–
Insert both parts together and close air filter housing
1
.
Info
If the air filter is not mounted correctly, dust and dirt may enter the engine
and cause damage.
Subsequent work
–
Install the air filter housing.
x
( p. 45)
–
Lock the seat. ( p. 45)
10.24
Cleaning the air filter and air filter housing
x
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Do not clean the air filter with fuel or petroleum since these substances attack the foam.
Preliminary work
–
Fold the seat up. ( p. 44)
–
Remove the air filter housing.
x
( p. 45)
–
Remove the air filter.
x
( p. 45)
B01065-01
Main work
–
Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.
Air filter cleaner ( p. 105)
Info
Only press the air filter to dry it, never wring it out.
–
Oil the dry air filter with a high quality filter oil.
Oil for foam air filter ( p. 105)