KTM Freeride 350 AU, Руководство пользователя, Страница: 76 / 116

15 ELECTRICAL SYSTEM
74
15.1 Removing the battery
Warning
Risk of injury Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks and open flames away from the battery. Only charge in well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least
15 minutes and contact a physician.
B01102-10
–
Switch off all power consumers and switch off the engine.
–
Remove screw

.
–
Remove fastening plate

.
B01103-10
–
Remove the battery from the battery compartment.
–
Disconnect negative cable

from the battery.
–
Pull back positive terminal cover

and disconnect the positive cable from the
battery.
15.2 Installing the battery
B01104-10
–
Position the positive cable and mount and tighten the screw.
Guideline
Screw, battery terminal M5 2.5 Nm
(1.84 lbf ft)
Info
Both poles of the contact disk

must be mounted between screw

and
cable lug

with the claws facing down.
–
Slide positive terminal cover

over the positive terminal.
–
Position the negative cable and mount and tighten the screw.
Guideline
Screw, battery terminal M5 2.5 Nm
(1.84 lbf ft)
Battery (YTX5L-BS) ( p. 101)