KTM Freeride 350 AU, Руководство пользователя, Страница: 61 / 116

12 SERVICE WORK ON THE CHASSIS
59
Info
Clean up overflowed or spilt brake fluid immediately with water.
12.45 Changing the hydraulic clutch fluid
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
M00518-11
–
Move the clutch fluid reservoir mounted on the handlebar to a horizontal position.
–
Remove screws

.
–
Remove cover

with membrane

.
M00519-10
–
Fill bleeding syringe

with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
p. 104)
–
On the clutch slave cylinder, remove bleeder screw  and mount bleeding
syringe  .
M00520-10
–
Inject the liquid into the system until it escapes from opening

of the master
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim 4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the screws.