KTM Freeride 250 R EU, Руководство пользователя

Страница: 49 / 115

12 SERVICE WORK ON THE CHASSIS
47
B01726-10
Main work
–
Pull air filter housing

up and off.
12.21 Installing the air filter housing
B01726-10
Main work
–
Mount air filter housing

on the intake flange.
Info
If the air filter housing is not mounted correctly, dust and dirt may enter the
engine and cause damage.
Finishing work
–
Lock the seat. ( p. 46)
12.22 Removing the air filter
Note
Engine failure
Unfiltered intake air has a negative effect on the service life of the engine.
–
Never operate the vehicle without an air filter as dust and dirt will enter the engine and lead to increased wear.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Preparatory work
–
Fold the seat up. ( p. 46)
–
Remove the air filter housing. ( p. 46)
M01030-10
Main work
–
Lightly press the air filter housing

together and open in a counterclockwise
direction.
–
Remove the air filter

with the air filter support

.
–
Take off air filter

from air filter support

.
12.23 Installing the air filter
B01757-10
Main work
–
Mount the clean air filter onto the air filter support.
–
Apply grease to the air filter around area

.
Long-life grease ( p. 105)