KTM Freeride 250 R EU, Руководство пользователя

Страница: 44 / 115

12 SERVICE WORK ON THE CHASSIS
42
12.10 Installing the lower triple clamp
0 0
B01058-10
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease ( p. 105)
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Check whether the upper steering head seal

is correctly positioned.
–
Slide on protective ring

and O-ring

.
B01739-10
–
Position the upper triple clamp with the handlebar.
–
Mount screw

but do not tighten yet.
–
Position the clutch line and wiring harness.
M01051-10
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the upper edge of
the upper triple clamp.
Position bleeder screws

toward the front.
M01052-10
–
Fully tighten screws

.
Guideline
Screw, bottom triple clamp M8 18 Nm
(13.3 lbf ft)
M01053-10
–
Tighten screw

.
Guideline
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft)