KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 138 / 222

18 30/ENGINE
136
202762-11
–
Mount the left section of the engine case.
Info
Do not use the screws to pull the two sections of the engine case together.
–
Mount screws
3
and, once all screws of the left section of the engine case have
been mounted, tighten them.
Guideline
Screw, engine case M6x40 10 Nm (7.4 lbf ft)
–
Mount screws
4
and, once all screws of the left section of the engine case have
been mounted, tighten them.
Guideline
Screw, engine case M6x55 10 Nm (7.4 lbf ft)
–
Mount screws
5
and tighten all screws in a crisscross pattern.
Guideline
Screw, engine case M6x60 10 Nm (7.4 lbf ft)
–
Fix the engine in the engine work stand.
–
Remove the excess lengths of the engine case gasket in the area of the cylinder
support and the reed valve housing.
18.5.7 Installing the reed valve housing
202761-11
–
Position the gasket.
–
Position reed valve housing
1
in the engine case opening.
202760-11
–
Position the intake flange.
–
Mount and tighten screws
2
.
Guideline
Screw, intake flange/reed valve housing M6 10 Nm (7.4 lbf ft)
18.5.8 Installing the rotor
202758-10
–
Ensure that the woodruff key is seated properly.
–
Grease the cone.
–
Mount the rotor and hold it with special tool
1
.
Holding spanner, rotor (55129001000) ( p. 208)
–
Mount washer and nut
2
. Tighten the nut.
Guideline
Nut, rotor M12x1 60 Nm
(44.3 lbf ft)