TUNING THE CHASSIS 11
51
11.13
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
F01197-10
–
Turn red adjusting screw
1
clockwise as far as it will go.
Info
Adjusting screw
1
is located at the upper end of the
right fork leg.
The rebound damping is located in right fork leg
REB
(red adjusting screw). The compression damping is
located in left fork leg
COMP
(white adjusting screw).
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
Rebound damping
Comfort
23 clicks
Standard
20 clicks
Sport
15 clicks
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.
11.14
Handlebar position
H02563-10
On the upper triple clamp, there are two holes at a distance of
A
to each other.
Hole distance
A
15 mm (0.59 in)
The holes on the handlebar supports are placed at a distance
of
B
from the center.
Hole distance
B
3.5 mm (0.138 in)
The handlebar supports can be mounted in four different posi-
tions.
