7 COMBINATION INSTRUMENT
30
Info
The
TR2
value can also be corrected manually during the
journey with the button
and the button .
If 999.9 is exceeded, the value of
TR2
is automatically
reset to 0.0.
Press the but-
ton
for 2
–
3
seconds.
Increases value of
TR2
.
Briefly press
the button .
Increases value of
TR2
.
Press the but-
ton
for 2
–
3
seconds.
Reduces value of
TR2
.
Briefly press
the button .
Reduces value of
TR2
.
Wait 10 - 12
seconds.
Stores and closes the Setup menu.
7.19
Display mode SPEED/A1 (average speed 1)
400325-01
–
Repeatedly press the button
briefly until
A1
appears at the
top right of the display.
A1
(average speed 1) shows the average speed calculated using
TR1
(trip master 1) and
S1
(stop watch 1).
The calculation of this value is activated by the first impulse of the
wheel speed sensor and ends 3 seconds after the last impulse.
Press the but-
ton
for 2
–
3
seconds.
Displays of
TR1
,
A1
and
S1
are reset to 0.0.
Briefly press
the button .
Next display mode
Press the but-
ton
for 2
–
3
seconds.
No function
Briefly press
the button .
No function
7.20
Display mode SPEED/A2 (average speed 2)
400326-01
–
Repeatedly press the button
briefly until
A2
appears at the
top right of the display.
A2
(average speed 2) shows the average speed on the basis of the
current speed if the stop watch
S2
(stop watch 2) is running.
Info
The displayed value can differ from the actual average
speed if
S2
was not stopped after the ride.
Briefly press
the button .
Next display mode
