12 SUSPENSION SETTING
94
12.1
Fork/shock absorber
Semi-active suspension
WP Semi
‑
active Suspension
can be used to tune the suspension individually without the
use of tools.
Electronic suspension setting
WP Semi
‑
active Suspension
constantly regulates the damping behavior of the sus-
pension taking into account various sensor data.
As a result, the electronic damping valves are matched to the current driving situation and terrain characteristics
as well as the settings made by the rider in the
Preload Adjuster
and
Suspension Mode
menus.
Always adapt the suspension to your riding style and the payload.
In the
Preload Adjuster
menu, the suspension can be set to the loading condition.
In the
Suspension Mode
menu, the damping behavior of the suspension can be set.
12.2
Preload adjuster
E02078-01
Possible states
• 0 % - 20 %
–
Setting for rides without luggage and a passen-
ger and a rider's weight up to 75 kg.
• 30%
–
Setting for rides without luggage and a passenger and
a rider's weight up to 85 kg.
• 40%
–
Setting for rides without luggage and a passenger and
a rider's weight up to 95 kg.
• 50 % - 60 %
–
Setting for rides with luggage, but without a
passenger.
• 70 % - 80 %
–
Setting for rides with a passenger, but without
luggage.
• 90 % - 100 %
–
Setting for rides with a passenger and lug-
gage.
• Low (optional)
–
Automatic adjustment of the spring preload
for a lot of sag on the rear wheel and therefore a low seat
height and low riding geometry.
• Standard (optional)
–
Automatic adjustment of the spring
preload, standard sag on the rear wheel and standard riding
geometry.
• High (optional)
–
Automatic adjustment of the spring preload
for a little sag on the rear wheel and therefore a slightly
higher seat height and sportier riding geometry.
Info
Only make adjustments on the preload adjuster if the rear
wheel is loaded and the motorcycle is not jacked up on the
center stand.
The spring preload can be adjusted to the load in
the
Preload Adjuster
menu. 11 manual settings (0 % to 100 %)
and 3 automatic settings
Low
(optional),
Standard
(optional)
and
High
(optional) are available.
The rebound setting is automatically adapted to the load detected
by the system.
