10 RIDING INSTRUCTIONS
84
10.3
Starting off
–
Pull the clutch lever, engage 1st gear, release the clutch lever slowly and simultaneously open the throttle
carefully.
10.4
Quicks (optional)
H01989-10
If the quicks (optional) is activated, you can shift up and
down without actuating the clutch.
Because there is no need to close the throttle grip, uninterrupted
gear shifts are possible.
The quicks uses the shifter shaft position to check whether
or not a shift should be initiated, and sends a corresponding signal
to the engine control.
If the quicks is disabled in the combination instrument,
the clutch needs to be actuated in the normal way for each shift.
10.5
Starting with HHC (optional)
402422-01
The
HHC
is an optional auxiliary function of the brake system.
The
HHC
prevents accidental rolling back of the motorcycle on
hills.
The
HHC
recognizes stopping on hills and operates the rear brake.
After releasing the brake lever, the brake force is maintained for
a maximum of 5 seconds as long as the motorcycle is not moving
forward.
When driving off the
HHC
releases the rear brake automatically.
Info
When the
HHC
is active, the TC indicator lamp
flashes
When the ignition is switched on, the
HHC
can still be
active even if the engine is stopped.
To roll back with active
HHC
, wait 5 seconds, shift to neu-
tral, or switch off the ignition.
If the
HHC
does not detect a start off after 5 seconds, the braking
force is automatically reduced gently.
When a brake lever is actuated, the
HHC
is re-activated.