KTM F9903U4, Руководство пользователя

Страница: 67 / 192

DASH 7
65
Info
RPM1
can be set in intervals of between 5,000 and
10,000 rpm.
RPM1 must not be larger than RPM2 .
If the engine speed reaches the set value RPM1 , the
shift light flashes red.
7.27.46 Shift Light RPM2
E02102-01
Condition
• The motorcycle is stationary.
–
Press the SET button or RIGHT button when the menu is closed.
–
Press the UP button or DOWN button until Settings is marked.
Press the SET or the RIGHT button to open the menu.
–
Press the UP button or DOWN button until Shift Light is marked.
–
Press the SET button to open the menu.
–
Press the UP button or DOWN button until RPM2 is marked.
–
Press the RIGHT or LEFT button to set the value for RPM2 .
Info
RPM2 can be set in intervals of between 5,000 and
10,000 rpm.
RPM2 must not be smaller than RPM1 .
If the engine speed does not reach the set value
RPM2
,
the entire display flashes red.
7.27.47 Clock & Date
E02113-01
Condition
• The motorcycle is stationary.
–
Press the SET button or RIGHT button when the menu is closed.
–
Press the UP button or DOWN button until Settings is marked.
Press the SET or the RIGHT button to open the menu.
–
Press the
UP
button or
DOWN
button until
Clock & Date
is
marked.
–
Press the
SET
button to open the menu.
Clock & Date allows the time, date and display formats to be set.
7.27.48 Clock Format
E02112-01
Condition
• The motorcycle is stationary.
–
Press the SET button or RIGHT button when the menu is closed.
–
Press the UP button or DOWN button until Settings is marked.
Press the SET or the RIGHT button to open the menu.
–
Press the UP button or DOWN button until Clock & Date is
marked.
–
Press the SET button to open the menu.
–
Press the UP button or DOWN button until Clock Format is
marked.
–
Press the RIGHT or LEFT button to set the time format.