7 DASH
62
Info
Before the
TPMS
mode
Custom
is selected, the desired air
pressure must be adjusted on the tires.
When the
TPMS
mode
Custom
is selected, the next received
value of the
TPMS
sensors is saved as a new reference
value.
It may take some time for the
TPMS
sensors to send a value
and for the new reference value to be saved.
The reference value can be between 1 bar and 5 bar
(between 14.5 psi and 72.5 psi).
The saved reference value is displayed in the
Bike Info
menu.
If the value currently measured by the tire air pressure sen-
sors is more than 50 % above or 20 % below the saved
reference value, a warning appears on the dash display.
In
Warnings Off
mode, the warnings from the tire air pressure mon-
itor are deactivated. The tire air pressure is still measured by the
tire air pressure sensors, but warnings no longer appear on the
dash display.
Info
KTM recommends the
Default
mode.
A second wheel set can be programmed via the KTM diag-
nostics tool. Your authorized KTM workshop will be glad to
help.
7.27.36 Anti Relay Attack
E02099-01
Condition
• The motorcycle is stationary.
–
Press the
SET
button or
RIGHT
button when the menu is closed.
–
Press the
UP
button or
DOWN
button until
Settings
is marked.
Press the
SET
or the
RIGHT
button to open the menu.
–
Press the
UP
button or
DOWN
button until
Anti Relay Attack
is
marked.
–
Use the
RIGHT
or
LEFT
button to switch the
Anti Relay Attack
p. 24) on or off.
7.27.37 Display Theme
E02094-01
Condition
• The motorcycle is stationary.
–
Press the
SET
button or
RIGHT
button when the menu is closed.
–
Press the
UP
button or
DOWN
button until
Settings
is marked.
Press the
SET
or the
RIGHT
button to open the menu.
–
Press the
UP
button or
DOWN
button until
Display Theme
is
marked.
–
Press the
RIGHT
or
LEFT
button to select the desired
Display Theme
mode.
In
Automatic
mode, the day or night mode is automatically
changed by the ambient light sensor integrated into the display.
In
Night
mode, the indicator remains in night mode.