KTM F8203S2, Инструкции по установке

Страница: 26 / 48

3 WORK
24
3.8 Installing the fork legs
402556-10
Main work
(EXC
‑
F EU/AU/US/BR)
–
Position the fork legs.
Bleeder screws
1
are positioned toward the front.
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the top edge of the upper
triple clamp.
V00452-11
–
Tighten screws
2
.
Guideline
Screw, top triple
clamp M8 20 Nm
(14.8 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom
triple clamp M8 15 Nm
(11.1 lbf ft)
402556-10
(All Six Days models)
–
Position the fork legs.
Bleeder screws
1
are positioned toward the front.
Info
The rebound damping is located in right fork
leg
REB (red adjusting screw). The compression
damping is located in left fork leg COM (white
adjusting screw).
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the top edge of the upper
triple clamp.
E00378-11
–
Tighten screws
2
.
Guideline
Screw, top triple
clamp M8 17 Nm
(12.5 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom
triple clamp M8 15 Nm
(11.1 lbf ft)