![KTM F8103S4 Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/ktm/f8103s4/f8103s4_setup-instructions_2007812022.webp)
3 SERVICE WORK ON THE CHASSIS
20
3.24
Removing the motorcycle from the lift stand
Note
Danger of damage
The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
401943-10
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
1
to the ground
with your foot and lean the motorcycle on it.
Info
When you are riding, the side stand must be folded up
and secured with the rubber strap.
3.25
Installing the engine guard
E00964-10
–
Position the engine guard on the frame at the front and mount
screws
1
but do not tighten yet.
–
Position the engine guard on the frame at the rear and mount
and tighten screws
2
.
Guideline
Screw, engine guard
M6x20
10 Nm (7.4 lbf ft)
–
Tighten screws
1
.
Guideline
Screw, engine guard
M6x12
10 Nm (7.4 lbf ft)
3.26
Installing the footrests
M00695-01
–
Mount the left footrest and the right footrest with the springs
and pins. Secure the pins using the washers and cotter pins.
Footrest spring plier (58429083000)