KTM F7360R6, Руководство пользователя

Страница: 95 / 178

12 SERVICE WORK ON THE CHASSIS
93
E00337-10
–
Move the clutch fluid reservoir mounted on the handlebar to a
horizontal position.
–
Remove screws
1
.
–
Remove cover
2
with membrane
3
.
E00843-10
–
Fill bleeding syringe
4
with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
p. 164)
–
On the clutch slave cylinder, remove bleeder screw
5
and
mount bleeding syringe
4
.
E00339-10
–
Now inject the fluid into the system until it emerges from drill
hole
6
of the master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
rim 4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
12.46 Removing the engine guard (All Six Days models, EXC AU)
H01638-10
–
Remove screws
1
and engine guard.