KTM F7360R6, Руководство пользователя

Страница: 67 / 178

12 SERVICE WORK ON THE CHASSIS
65
12.6 Installing the fork protector
V00332-11
–
Position the fork protector on the left fork leg. Mount and
tighten screws
1
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
2
.
–
Position the fork protector on the right fork leg. Mount and
tighten screws
3
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
12.7 Removing the fork legs
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 63)
–
Remove the front wheel. ( p. 107)
–
Remove the headlight mask with the headlight. ( p. 119)
E00375-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove the cable tie(s).
–
Remove screws
2
and take off the brake caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
E00376-10
(All standard EXC/XC-W models)
–
Loosen screws 3 . Take out the left fork leg.
–
Loosen screws
4
. Take out the right fork leg.