11 TUNING THE CHASSIS
60
Info
Adjust the spring preload to the numerical values only
as the preload will not engage between the numerical
values.
Turn clockwise to increase the spring preload; turn
counterclockwise to reduce the spring preload.
Adjusting the spring pretension has no influence on the
absorption setting of the rebound.
Basically, however, you should set the rebound damp-
ing higher with a higher spring pretension.
Finishing work
–
Remove the motorcycle from the lift stand. (
11.15
Handlebar position
M00993-10
(All standard EXC/XC-W models)
On the upper triple clamp, there are 2 holes at a distance
of
A
to each other.
Hole distance A
15 mm (0.59 in)
The holes on the handlebar support are placed at a distance
of
B
from the center.
Hole distance B
3.5 mm (0.138 in)
The handlebar can be mounted in four different positions. This
allows the handlebar to be mounted in the most comfortable
position for the rider.
Содержание F7360R6
Страница 1: ...OWNER S MANUAL 2018 250 EXC 250 XC W 300 EXC 300 XC W 300 XC W Six Days Art no 3213644en...
Страница 2: ......
Страница 154: ...22 TECHNICAL DATA 152 Nut primary gear M18LHx1 5 150 Nm 110 6 lbf ft Loctite 648...
Страница 178: ...3213644en 3213644en 03 2017 KTM Sportmotorcycle GmbH 5230 Mattighofen Austria http www ktm com Photo Mitterbauer KTM...
