KTM F7360R6, Руководство пользователя

Страница: 146 / 178

19 CLEANING, CARE
144
–
After the motorcycle has cooled off, lubricate all moving parts
and bearings.
–
Clean the chain. ( p. 84)
–
Treat bare metal parts (except for brake discs and exhaust sys-
tem) with anti-corrosion materials.
Preserving materials for paints, metal and rubber
(
p. 167)
–
Treat all plastic parts and powder-coated parts with a mild
cleaning and care product.
Special cleaner for glossy and matte paint finishes, metal
and plastic surfaces (
p. 168)
(All EXC models)
–
Oil the steering lock.
Universal oil spray ( p. 168)
19.2 Checks and maintenance steps for winter operation
Info
If you use the motorcycle in winter, salt can be expected on the roads. You should therefore take precau-
tions against aggressive road salt.
If the vehicle has been used on salted roads, use cold water for cleaning after riding. Warm water
enhances the corrosive effects of salt.
401060-01
–
Clean the motorcycle. ( p. 143)
–
Clean the brakes.
Info
After EVERY trip on salted roads, thoroughly wash the
cool and installed brake calipers and brake linings with
cold water and dry carefully.
After riding on salted roads, thoroughly wash the vehi-
cle with cold water and dry it well.
–
Treat the engine, the swingarm, and all other bare or galva-
nized parts (except brake discs) with a wax-based corrosion
inhibitor.
Info
Corrosion inhibitor is not permitted to come in contact
with the brake discs as this would greatly reduce the
braking force.
–
Clean the chain. ( p. 84)