KTM F7360R6, Руководство пользователя

Страница: 117 / 178

15 ELECTRICAL SYSTEM
115
Guideline
Screw, battery termi-
nal M5 2.5 Nm
(1.84 lbf ft)
Contact disks
A
must be mounted under screws
5
and
cable sockets
6
with the claws toward the battery termi-
nal.
Finishing work
–
Mount the seat. ( p. 76)
15.3 Recharging the battery
Warning
Environmental hazard Batteries contain environmentally-hazardous materials.
–
Do not dispose of batteries as household waste.
–
Dispose of batteries at a collection point for used batteries.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Even when there is no load on the battery, it discharges steadily.
The charging level and the method of charging are very important for the service life of the battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the battery is depleted by repeated starting, the battery must be charged immediately.
Preparatory work
(All EXC models)
–
Press and hold the kill switch while the engine is idling
until the engine stops.
(All XC
‑
W models)
–
Press and hold the kill switch while the engine is idling
until the engine stops.
–
Remove the seat. ( p. 76)
–
Remove the battery. ( p. 113)