KTM F7103Q3, Инструкции по установке

Страница: 6 / 37

2 SETUP
4
H01768-10
(All EXC/EXC Six Days models)
–
Position the turn signal indicator lamp

in the speedometer bracket.
402736-10
(all EXC/EXC Six Days models, 125 XC
‑
W)
–
Position the connector retainer and speedometer on the upper triple clamp.
–
Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm
(7.4 lbf ft)
402737-10
(XC
‑
W US, XC
‑
W Six Days US)
–
Position the speedometer on the upper triple clamp.
–
Mount and tighten screws

with the collar bushings.
Guideline
Remaining screws, chassis M6 10 Nm
(7.4 lbf ft)
–
Route the clutch line with the clutch master cylinder toward the front between
the upper and lower triple clamps.
–
Install the fork legs. ( p. 20)
S01414-10
(All standard EXC/XC-W models)
–
Remove screws

and take off handlebar supports.
–
Move the handlebar supports to the desired position and mount and tighten
screws
 .
Guideline
Screw, handlebar support M10 40 Nm
(29.5 lbf ft) Loctite ® 243™
Info
Position the left and right handlebar supports evenly.
E00483-01
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount and tighten the screws evenly.
Guideline
Screw, handlebar clamp M8 20 Nm
(14.8 lbf ft)