KTM F3001U1, Руководство пользователя

Страница: 62 / 157

13 SERVICE WORK ON THE CHASSIS
60
–
Clean and oil the dust boots and inside fork tubes of both fork
legs.
Universal oil spray ( p. 145)
–
Press the dust boots back into the installation position.
–
Remove the excess oil.
Finishing work
–
Install the fork protector. ( p. 59)
–
Remove the motorcycle from the lift stand. ( p. 57)
–
Install the Powerpack HV. ( p. 109)
–
Lock the seat. ( p. 69)
13.7 Removing the fork legs
Preparatory work
–
Deactivate the vehicle. ( p. 43)
–
Fold the seat up. ( p. 69)
–
Remove the Powerpack HV. ( p. 108)
–
Mount the protection cap. ( p. 71)
–
Raise the motorcycle with a lift stand. ( p. 57)
–
Remove the front wheel. ( p. 91)
–
Remove the headlight mask with the headlight. ( p. 102)
F03124-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove the cable tie(s) and disconnect plug-in connector.
–
Remove screws 2 and take off the brake caliper.
–
Allow the brake caliper and the brake line to hang loosely to
the side.
F02483-10
–
Loosen screws
3
. Take out the left fork leg.
–
Loosen screws
4
. Take out the right fork leg.