KTM 990 Supermoto R Скачать руководство пользователя страница 77

Страница: 77 / 220

MAINTENANCE WORK ON FRAME AND ENGINE

9.1

Jacking up motorcycle at the front

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

–

Jack up the motorcycle at the rear. (

p. 76)

B00128-01

–

Move the handlebar to the straight-ahead position. Align the work stand at the front
with the adapters to the fork legs.

Front work stand (61029055300)

Info

Always jack up the rear of the motorcycle first.

–

Jack up the motorcycle at the front.

9.2

Taking the front from the work stand

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

–

Secure the motorcycle against falling over.

–

Remove the work stand at the front.

Содержание 990 Supermoto R





























































































































































































































Результаты поиска

Содержание 990 Supermoto R

Отзывы:

KTM 990 Supermoto R, Руководство пользователя, Страница: 77 / 220

Результаты поиска

Содержание 990 Supermoto R

Отзывы: