KTM 990 Supermoto R Скачать руководство пользователя страница 187

Страница: 187 / 220

CLEANING

185

Warning

Danger of accidents

Reduced braking efficiency due to wet or dirty brakes.

–

Clean or dry dirty or wet brakes by riding and braking gently.

–

After cleaning, ride the vehicle a short distance until the engine warms up, applying the brakes occasionally.

Info

The heat produced causes water at inaccessible positions in the engine and on the brakes to evaporate.

–

After the motorcycle has cooled off, lubricate all moving parts and bearings.

–

Clean the chain. (

p. 88)

–

Treat bare metal parts (except for brake discs and exhaust system) with anti-corrosion materials.

Cleaning and preserving materials for metal, rubber and plastic (

p. 210)

–

Treat all painted parts with a mild paint polish.

High-luster polish for paint (

p. 210)

–

Oil the ignition/steering lock, tank lock, and seat lock.

Universal oil spray (

p. 211)

Содержание 990 Supermoto R





























































































































































































































Результаты поиска

Содержание 990 Supermoto R

Отзывы:

KTM 990 Supermoto R, Руководство пользователя, Страница: 187 / 220

Результаты поиска

Содержание 990 Supermoto R

Отзывы: