KTM 990 SUPERMOTO R AUS/UK, Руководство пользователя, Страница: 156 / 218

15 COOLING SYSTEM
154
C00351-10
Main work
–
Place a suitable container under the radiator.
–
Remove radiator cap
1
.
–
Remove screw
2
.
–
Completely drain the coolant.
–
Mount screw
2
with a new seal ring and tighten it.
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
B00676-11
–
Place a suitable container under the engine.
–
Remove screw
3
.
–
Completely drain the coolant.
–
Mount screw
3
with a new seal ring and tighten it.
Guideline
Screw, water pump cover M6 10 Nm (7.4 lbf ft)
15.5 Filling/bleeding the cooling system
x
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
–
Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.