KTM 990 SUPERMOTO R AUS/UK Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 218

KTM 990 SUPERMOTO R AUS/UK Скачать руководство пользователя страница 10

2

SAFETY ADVICE

8

2.1

Use definition - intended use

KTM sport motorcycles are designed and constructed to meet the normal demands of regular road operation but not for use on race
courses or offroad.

Info

The motorcycle is only authorized for operation on public roads in the homologated version.

2.2

Safety advice

A number of safety instructions need to be followed to operate the vehicle safely. Therefore, read this manual carefully. The safety instruc-
tions are highlighted in the text and are referred to at the relevant passages.

Info

The vehicle has various information and warning labels at prominent locations. Do not remove information/warning labels. If they
are missing, you or others may not recognize dangers and may therefore be injured.

«
...
8
9
10
11
12
...
»

Содержание 990 SUPERMOTO R AUS/UK



























































































































































































































Отзывы:

Нет отзывов