KTM 990 ADVENTURE страница 14 Скачать руководство пользователя

Страница: 14 / 102

OPERATION INSTRUMENTS

Indicator lamps

The green indicator lamp will blink in the blinker rhythm when the blinker is

switched on.

NOTE: The indicator lamp will blink faster when a blinker is broken.

The green indicator lamp will light up when the gearbox is in an

idling position.

The blue indicator lamp will light up when the high beams are

switched on.

The red warning light will light up when the cooling liquid has reached a tempera-

ture of approx. 120°C (248°F).

The orange warning light will light up when the fuel level has reached the reserve

mark. At the same time the display will automatically change to TRIP F (see TRIP F).

The red warning lamp lights up when the ignition is switched on but the engine is

not running. When the engine is started, the warning lamp will go out as soon as

the oil pressure is high enough.

The orange warning lamp (fuel injection) briefly lights up when the ignition is

switched on. It will go out when the gasoline pressure is high enough.

If this warning lamp lights up while driving, a component in the injection system

is defective. The error can be identified by means of a blink code (see Trouble shoot-

ing).

Содержание 990 ADVENTURE







































































































Результаты поиска

Содержание 990 ADVENTURE

Отзывы:

Похожие инструкции для 990 ADVENTURE

Бренды по названию

Популярные бренды

KTM 990 ADVENTURE, Руководство пользователя

Результаты поиска

Содержание 990 ADVENTURE

Отзывы:

Похожие инструкции для 990 ADVENTURE

Бренды по названию

Популярные бренды