KTM 990 Adventure AUS Скачать руководство пользователя страница 102 | Manualshive

Страница: 102 / 218

KTM 990 Adventure AUS Скачать руководство пользователя страница 102

BRAKES

100

11.3

Adjusting the free travel of the hand brake lever

100556-10

–

Check the free travel of the hand brake lever. (

–

Adjust the free travel of the hand brake lever with the adjustment screw



.

Info

Turn the adjustment screw clockwise to reduce free travel. The pressure point
moves away from the handlebar.
Turn the adjustment screw counterclockwise to increase free travel. The pressure
point moves towards the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!

11.4

Checking the brake discs

Warning

Danger of accidents

Reduced braking efficiency due to worn brake disc(s).

–

Change the worn brake disc(s) without delay. (Your authorized KTM workshop will be glad to help.)

400618-10

–

Check the thickness of the front and rear brake discs in several places to ensure that it
conforms to measurement



.

Info

Wear reduces the thickness of the brake disc in area



of the brake disc.

Brake discs - wear limit

Front

4.5 mm (0.177 in)

Brake disc - wear limit

«
...
100
101
102
103
104
...
»

Содержание 990 Adventure AUS



























































































































































































































Отзывы:

Нет отзывов