KTM 990 Adventure AUS/UK Скачать руководство пользователя страница 147

Страница: 147 / 216

MAINTENANCE WORK ON FRAME AND ENGINE

145

–

Add coolant to the

MAX

marking.

Alternative 1

Coolant (

p. 201)

Alternative 2

Coolant (mixed ready to use) (

p. 201)

–

Mount the cap of the compensating tank.

B00117-10

–

Remove radiator cap



–

Check the coolant antifreeze.

−

25…

−

45 °C (

−

13…

−

49 °F)

» If the antifreeze does not meet specifications:

–

Correct the coolant antifreeze.

–

Check the coolant level in the radiator.

The radiator must be completely filled.

» If the coolant level does not meet specifications:

Coolant loss: < 0.50 l (< 0.53 qt.)

–

Check the cooling system for leaks.

Info

Do not start up the motorcycle!

–

Correct the coolant level.

Alternative 1

Coolant (

p. 201)

Alternative 2

Coolant (mixed ready to use) (

p. 201)

Содержание 990 Adventure AUS/UK

























































































































































































































Результаты поиска

Содержание 990 Adventure AUS/UK

Отзывы:

KTM 990 Adventure AUS/UK, Руководство пользователя, Страница: 147 / 216

Результаты поиска

Содержание 990 Adventure AUS/UK

Отзывы: