KTM 990 Adventure AUS/UK Скачать руководство пользователя страница 146 | Manualshive

Страница: 146 / 216

KTM 990 Adventure AUS/UK Скачать руководство пользователя страница 146

MAINTENANCE WORK ON FRAME AND ENGINE

144

Warning

Danger of poisoning

Coolant is poisonous and a health hazard.

–

Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.

Condition

The engine is cold.

–

Remove the front side cover. (

Only remove the right side cover.

600898-10

–

Park the motorcycle upright on a horizontal surface.

–

Remove cap



of the compensating tank.

–

Check the coolant antifreeze.

−

25…

−

45 °C (

−

13…

−

49 °F)

» If the antifreeze does not meet specifications:

–

Correct the coolant antifreeze.

–

Check the coolant level in the compensating tank.

The coolant level must be between

MIN

and

MAX

.

» If there is no coolant in the compensating tank:

–

Check the cooling system for leaks.

x

Info

Do not start up the motorcycle!

–

Fill/bleed the cooling system.

» If the coolant in the compensating tank is not at the required level, but the tank is

not empty:

«
...
144
145
146
147
148
...
»

Содержание 990 Adventure AUS/UK

























































































































































































































Отзывы:

Нет отзывов