manualshive.com logo in svg

KTM 990 ADVENTURE 2008, Руководство пользователя, Страница: 66 / 102

Поделиться
Скачать
KTM 990 ADVENTURE 2008 Скачать руководство пользователя страница 66

Fuses for individual current consumers

A fuse box with additional fuses is mounted in the storage compartment to separately pro-

tect the current consumers against short circuits.

The current consumers and the corresponding fuse capacities are listed on the cover of the

fuse box 

[1]

. Spare 10, 15, 25 and 40-ampere fuses 

[2]

are also located next to the stor-

age compartment. 

Replace a blown fuse only with an equivalent one. Visit an authorized KTM workshop if the

new fuse blows again.

Under no circumstances is a stronger fuse allowed to be set in or a fuse allowed to be “repaired”.

An inexpert treatment could damage the whole electrical installation!

The ACC 1 / CLOCK and ACC 2 fuses 

[3]

are  designed for accessory equipment with a max-

imum current consumption of 10 amperes each. The respective connectors for this equip-

ment are provided under the headlight cover. For more information, contact an authorized

KTM workshop.

NOTE FOR MODELS WITH ABS: 

The ABS OPTIONAL fuse 

[4] 

is the fuse for the ABS. 

MAINTENANCE WORK ON CHASSIS AND ENGINE 

»

65

1

2

3

4

Содержание 990 ADVENTURE 2008







































































































Отзывы:

Нет отзывов