KTM 950 SUPERMOTO 2007 страница 4 Скачать руководство пользователя

Страница: 4 / 94

IMPORTANT INFORMATION

WARRANTY

The service work specified in the „Lubrication and Maintenance Schedule“ must be performed by an authorized KTM workshop.

This is the only place that has the qualified technicians and the special tools required for the 950 Supermoto / R. Be sure to have

the workshop verify all service work carried out in the service manual to avoid losing your right to claim under the warranty.

The warranty or guarantee shall become void for damage and consequential damage caused by manipulations or conversions to the

motorcycle.

AUTOMOTIVE FLUIDS

The fuels, lubricants and liquids specified in the Owner's Manual or automotive fluids with equivalent specifications must be used

in accordance with the maintenance schedule.

SPARE PARTS, ACCESSORIES

For your own safety, only use spare parts and accessories approved by KTM. KTM shall not assume any liability for other products

or consequential damage resulting from the use of such products.

ENVIRONMENT

Motorcycle driving is a wonderful sport and we hope that you will be able to enjoy it to the full. It may, however, involve potential

problems for the environment or lead to conflicts with others. These problems or conflicts can be avoided if the motorcycle is used

responsibly. To safeguard the future of motorcycle sports, make sure that you use the motorcycle in accordance with the law, show

that you are environmentally conscious and respect the rights of others.

Enjoy driving your motorcycle !

KTM SPORTMOTORCYCLE AG

5230 MATTIGHOFEN, AUSTRIA

Содержание 950 SUPERMOTO 2007































































































Результаты поиска

Содержание 950 SUPERMOTO 2007

Отзывы:

Похожие инструкции для 950 SUPERMOTO 2007

Бренды по названию

Популярные бренды

KTM 950 SUPERMOTO 2007, Руководство пользователя

Результаты поиска

Содержание 950 SUPERMOTO 2007

Отзывы:

Похожие инструкции для 950 SUPERMOTO 2007

Бренды по названию

Популярные бренды