KTM 950 SUPERMOTO 2007 Скачать руководство пользователя страница 10

Страница: 10 / 94

CLOCK

You will recognize the CLOCK display by the blinking dots between the hours and minutes.

It displays the speed, temperature of the cooling liquid and the clock.

To switch to the next display mode, press the MODE button.

ODO

The speed, temperature of the cooling liquid and the total kilometers or miles traveled are

shown in the ODO mode.

To switch to the next display mode, press the MODE button.

TRIP 1

The TRIP 1 mode shows the speed, the temperature of the cooling liquid and the trip

odometer 1.

To switch to the next display mode, press the MODE button.

TRIP 2

The TRIP 2 mode shows the speed, the temperature of the cooling liquid and the trip

odometer 2.

To switch to the next display mode, press the MODE button.

TRIP F

The TRIP F mode (fuel) displays the speed, the temperature of the cooling liquid and the

distance traveled since reaching the low-fuel mark (the low-fuel indicator lamp lights up).

To return to the CLOCK mode, press the MODE button.

OPERATION INSTRUMENTS

ODO

CLOCK

TRIP 1

TRIP 2

TRIP F

Содержание 950 SUPERMOTO 2007































































































Результаты поиска

Содержание 950 SUPERMOTO 2007

Отзывы:

KTM 950 SUPERMOTO 2007, Руководство пользователя, Страница: 10 / 94

Результаты поиска

Содержание 950 SUPERMOTO 2007

Отзывы: