KTM 890 Duke R US 2020, Руководство оператора

Страница: 252 / 317

17 COOLING SYSTEM
250
K01375-11
–
Remove bleeder screw 3 .
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the vent
hole, and then mount and tighten bleeder screw
3
immedi-
ately.
Coolant 1.6 l (1.7 qt.) Coolant ( p. 298)
–
Completely fill the radiator with coolant. Mount radiator
cap
2
.
–
Rest the vehicle on the side stand.
Danger
Danger of poisoning
Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and run it until the 5th bar of the temperature
indicator lights up.
–
Stop the engine and allow it to cool down.
–
After the engine has cooled down, check the coolant level in
the radiator and in the compensating tank again and add more
coolant if necessary.