KTM 890 ADVENTURE 2022, Руководство пользователя

Страница: 92 / 171

13 SERVICE WORK ON THE CHASSIS
90
V01265-10
–
Check the chain sliding guard for wear.
» If continuous signs of wear to the chain are visible on the
chain sliding guard in the area
D
marked:
–
Change the chain sliding guard.
» If the chain sliding guard is highly worn on the underside
in the marked area
E
:
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten screws on the chain sliding guard.
Guideline
Remaining screws,
chassis M5 5 Nm (3.7 lbf ft)
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 83)
13.14 Removing the left side cover
Preparatory work
–
Remove the passenger seat. ( p. 84)
–
Remove the front rider's seat. ( p. 85)
F03348-10
Main work
–
Remove left side cover from the rubber bushings in the
areas
A and B .
–
Pull off the left side cover sideways and remove it toward the
front.