KTM 890 ADVENTURE 2022, Руководство пользователя

Страница: 146 / 171

22 TROUBLESHOOTING
144
Faults Possible cause Action
The engine does not turn when
the start button is pressed Operating error
–
Carry out start procedure. ( p. 70)
12-V battery discharged
–
Charge the 12-V battery. ( p. 124)
–
Check the open-circuit current.
Fuse 1 , 2 or 3 blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 128)
Main fuse burned out
–
Change the main fuse. ( p. 126)
No ground connection present
–
Check the ground connection.
The engine only turns if the
clutch lever is drawn The vehicle is in gear
–
Shift the transmission into neutral .
The vehicle is in gear and the
side stand is folded out
–
Shift the transmission into neutral .
The engine turns but does not
start Operating error
–
Carry out start procedure. ( p. 70)
Fuse 3 blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 128)
Quick release coupling not
joined
–
Join quick release coupling.
Malfunction in the electronic
fuel injection
–
Read out the fault memory using the
KTM diagnostics tool.
Throttle opened while starting
–
When starting, DO NOT open the throt-
tle.
–
Carry out start procedure. ( p. 70)
Engine has too little power Air filter is very dirty
–
Remove the air filter.
–
Install the air filter.
Fuel filter is very dirty
–
Check the fuel pressure.
Malfunction in the electronic
fuel injection
–
Read out the fault memory using the
KTM diagnostics tool.
Engine overheats Too little coolant in cooling sys-
tem
–
Check the cooling system for leaks.
–
Check the coolant level in the compen-
sating tank. (
p. 132)
Radiator fins very dirty
–
Clean radiator fins.
Foam formation in cooling sys-
tem
–
Drain the coolant.
–
Fill/bleed the cooling system.
Buckled or damaged radiator
hose
–
Change the radiator hose.
Thermostat defective
–
Check the thermostat.
Fuse
4
is blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 128)
Defect in radiator fan system
–
Check the radiator fan system.
Malfunction indicator lamp
lights up or flashes Malfunction in the electronic
fuel injection
–
Read out the fault memory using the
KTM diagnostics tool.
N The idling speed indicator
lamp does not light up when
the transmission is in neutral
Gear position sensor not pro-
grammed
–
Read out the trouble code memory
using the KTM diagnostics tool.
The engine dies during the trip Lack of fuel
–
Refuel. ( p. 77)
Fuse 1 , 2 or 3 blown
–
Change the fuses of individual electri-
cal power consumers. (
p. 128)
The ABS warning lamp lights
up ABS fuse blown
–
Change the ABS fuses. ( p. 127)