KTM 890 ADVENTURE 2022, Руководство пользователя

Страница: 131 / 171

ELECTRICAL SYSTEM 16
129
F03306-10
–
Remove the faulty fuse.
Guideline
Fuse
1
- 10 A - ignition, alarm system (optional)
Fuse 2 - 10 A - ignition, engine control unit, electronic fuel
injection, fuel vapor retention system, lambda sensor, immo-
bilizer
Fuse
3
- 10 A - fuel pump
Fuse 4 - 15 A - radiator fan
Fuse 5 - 10 A - horn, combination instrument, brake light
Fuse 6 - 10 A - high beam, low beam, position light, tail
light, license plate lamp
Fuse
7 - 10 A - ACC1
Fuse 8 - 15 A - ACC2, HCU (optional)
Fuse 9 - 10 A - ABS control unit, diagnostics connector, 5D
sensor, TPMS (function optional)
Fuse
10 - 10 A - light control unit
Fuse SPARE - 10 A - spare fuses
Fuse
SPARE
- 15 A - spare fuses
Info
A faulty fuse has a burned-out fuse wire
A
.
–
Insert the spare fuse with the correct rating.
Fuse (75011088010) ( p. 151)
Fuse (75011088015) ( p. 151)
Tip
Put a spare fuse in the fuse box so that it is available if
needed.
–
Check the function of the electrical power consumers.
–
Close the fuse box cover.
Finishing work
–
Mount the front rider's seat. ( p. 85)
–
Mount the passenger seat. ( p. 85)
16.8 Checking the headlight setting
400726-10
–
Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
B
under the first marking.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle upright at distance
A
from the wall and
switch on the low beam.
Guideline
Distance
A
5 m (16 ft)