KTM 85 SX 17/14, Руководство пользователя

Страница: 41 / 96

11 SERVICE WORK ON THE CHASSIS
39
11.13 Greasing the steering head bearing
x
800010-10
–
Remove the lower triple clamp.
x
( p. 35)
–
Install the lower triple clamp.
x
( p. 36)
11.14 Removing the start number plate
L00049-11
–
Remove screw
1
and take off the clamp.
–
Remove screw
2
. Take off the start number plate.
11.15 Installing the start number plate
L00049-10
–
Position the start number plate. Mount and tighten screw
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
The holding lugs engage.
–
Position the brake line and clamp. Mount and tighten screw
2
.
11.16 Removing the front fender
L00040-10
–
Remove screws
1
. Remove the front fender.
11.17 Installing the front fender
L00040-10
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws
1
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
The holding lugs engage.