KTM 790 DUKE 2021, Руководство пользователя, Страница: 98 / 139

16 ELECTRICAL SYSTEM
96
The light-dark boundary must be exactly on the lower mark-
ing when the motorcycle is ready to be operated with the
rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. ( p. 96)
16.13 Adjusting the headlight range
Preparatory work
–
Check the headlight setting. ( p. 95)
V01212-10
Main work
–
Turn adjusting screw
1
to adjust the headlight range.
Info
Turn clockwise to increase the headlight range; turn
counterclockwise to reduce the headlight range.
If you have a payload, you may have to correct the
headlight range.
Screw
1
also secures the headlight. Ensure the screw
is always screwed in far enough.
400726-11
–
Set the headlight to marking
B
.
Guideline
The light-dark boundary must lie exactly on lower mark-
ing
B
when the motorcycle is ready to operate with the
rider mounted along with any luggage and a passenger, if
applicable.
16.14 Diagnostics connector
H02681-10
Diagnostics connector
1
is located under the passenger seat.
(CN)
A diagnosis adapter has been connected in the factory for con-
nection with diagnosis interface which applies to all manufac-
turers.
Info
Remove the diagnosis adapter to use the KTM diagno-
sis tool.
Following completion of the diagnostics, plug the diag-
nostics adapter back in.