KTM 790 DUKE 2021, Руководство пользователя, Страница: 105 / 139

COOLING SYSTEM 17
103
V01254-11
–
Position the motorcycle upright.
–
Position an appropriate container under the engine.
–
Remove screw
1
with the seal ring.
V01257-11
–
Remove radiator cap
2
.
–
Completely drain the coolant.
–
Mount and tighten screw
1
with a new seal ring.
Guideline
Screw plug,
water pump
drain hole EJOTALtracs ®
Plus 60x14
8 Nm (5.9 lbf ft)
Loctite ® 243™
V01258-11
–
Remove bleeder screw
3
.
–
Tilt the vehicle slightly to the right.
–
Pour in coolant until it emerges without bubbles at the vent
hole, and then mount and tighten bleeder screw
3
immedi-
ately.
Coolant 1.4 l (1.5 qt.) Coolant ( p. 127)
–
Completely fill the radiator with coolant. Mount radiator
cap
2
.
–
Rest the vehicle on the side stand.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and run it until the 5th bar of the temperature
indicator lights up.
–
Stop the engine and allow it to cool down.
–
After the engine has cooled down, check the coolant level in
the radiator and in the compensating tank again and add more
coolant if necessary.