KTM 690 SMC USA 2010 Скачать руководство пользователя страница 89

Страница: 89 / 196

MAINTENANCE WORK ON CHASSIS AND ENGINE

100135-10

–

Check the thickness of the front and rear brake discs in several places to ensure that it
conforms to measurement



Info

Wear reduces the thickness of the brake disc at the contact surface



of the

brake disc.

Brake discs - wear limit

Front

4.0 mm (0.157 in)

Rear

4.5 mm (0.177 in)

» If the brake disc thickness is less than the specified value:

–

Replace the brake disc.

–

Check the front and rear brake discs for damage, cracks, and deformation.
» If damage, cracks, or deformation are visible on the brake disc:

–

Replace the brake disc.

9.31

Adjusting the basic position of the hand brake lever

600598-10

–

Adjust the basic setting of the hand brake lever to your hand size by turning adjusting
wheel



Info

Pull the brake lever forwards and turn the adjusting wheel.
Do not make any adjustments while riding!

Содержание 690 SMC USA 2010





































































































































































































Результаты поиска

Содержание 690 SMC USA 2010

Отзывы:

KTM 690 SMC USA 2010, Руководство пользователя, Страница: 89 / 196

Результаты поиска

Содержание 690 SMC USA 2010

Отзывы: