KTM 690 SMC USA 2010 Скачать руководство пользователя страница 140

Страница: 140 / 196

MAINTENANCE WORK ON CHASSIS AND ENGINE

138

100284-10

–

Screw off the radiator cap



–

Check antifreeze of coolant.

−

25…

−

45 °C (

−

13…

−

49 °F)

» If the antifreeze of the coolant does not meet specifications:

–

Correct the antifreeze of the coolant.

–

Check the coolant level in the radiator.

The radiator must be completely filled.

» If the coolant level does not meet specifications:

–

Rectify the coolant level and find out the cause of the loss.

Alternative 1

Coolant (

p. 181)

Alternative 2

Coolant (mixed ready to use) (

p. 181)

–

Mount the radiator cap.

9.73

Checking the coolant level

Warning

Danger of scalding

During motorcycle operation, the coolant gets very hot and is under pressure.

–

Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.

Содержание 690 SMC USA 2010





































































































































































































Результаты поиска

Содержание 690 SMC USA 2010

Отзывы:

KTM 690 SMC USA 2010, Руководство пользователя, Страница: 140 / 196

Результаты поиска

Содержание 690 SMC USA 2010

Отзывы: