KTM 690 SMC 2008, Руководство по ремонту

Страница: 84 / 227

14/LIGHT SYSTEM, INSTRUMENTS
82
15.1
Setting kilometers or miles
Info
If you change the unit, the value ODO is retained and converted accordingly.
Making the setting according to the country.
Condition
The motorcycle is stationary.
700120-01
–
Switch on the ignition by turning the ignition key in the position (690 SMC EU,
690 SMC AUS/UK) (690 SMC USA).
–
Press the MODE button repeatedly until the ODO mode is active.
–
Keep the MODE button pressed until the display mode changes from km/h to mph or
from mph to km/h .
15.2
Setting the clock
Condition
The motorcycle is stationary.
700115-10
–
Switch on the ignition by turning the ignition key in the position (690 SMC EU,
690 SMC AUS/UK) (690 SMC USA).
–
Press the MODE button repeatedly until the ODO mode is active.
–
Keep the MODE button and the SET button pressed simultaneously.
The time display begins to flash.
–
Press the MODE button to set the hour.
–
Press the SET button to set the minute.
–
Keep the MODE button and the SET button pressed simultaneously.
The time is set.
15.3
Combination instrument - setting/resetting TRIP 1
Info
The TRIP 1 trip counter is always running and counts up to 999.9 .
The trip counter can be used to measure the distance covered during trips or between two refueling stops. After the value
999.9 is reached, the trip counter starts at 0.0 again.
700121-01
–
Switch on the ignition by turning the ignition key in the position (690 SMC EU,
690 SMC AUS/UK) (690 SMC USA).
–
Press the MODE button repeatedly until the TRIP 1 mode is active.
–
Keep the SET button pressed.
The TRIP 1 display is set to 0.0 .