KTM 690 Enduro R USA, Руководство пользователя

Страница: 191 / 207

22 TECHNICAL DATA
189
Hard 85 N/mm (485 lb/in)
Spring length 220 mm (8.66 in)
Gas pressure 10 bar (145 psi)
Static sag 18 mm (0.71 in)
Riding sag 70… 80 mm (2.76… 3.15 in)
Fitted length 395 mm (15.55 in)
Shock absorber oil ( p. 195) SAE 2.5
22.9 Chassis tightening torques
Screw, chain guard EJOT 2 Nm (1.5 lbf ft)
–
Screw, combination instrument EJOT 1 Nm (0.7 lbf ft)
–
Screw, license plate holder, bottom EJOT 3 Nm (2.2 lbf ft)
–
Screw, side cover on spoiler EJOT 1 Nm (0.7 lbf ft)
–
Screw, side stand switch EJOT 2 Nm (1.5 lbf ft)
–
Screw, SLS valve EJOT 2 Nm (1.5 lbf ft)
–
Fitting, side stand switch M4 2 Nm (1.5 lbf ft)
–
Spoke nipple, front wheel M4.5 3… 6 Nm (2.2… 4.4 lbf ft)
–
Bolt, foot brake lever stub M5 6 Nm (4.4 lbf ft) Loctite ® 243™
Remaining nuts, chassis M5 4 Nm (3 lbf ft)
–
Remaining screws, chassis M5 4 Nm (3 lbf ft)
–
Screw, brake line holder on swingarm M5 4 Nm (3 lbf ft)
–
Screw, cable on starter motor M5 3 Nm (2.2 lbf ft)
–
Screw, electrical holder M5 3 Nm (2.2 lbf ft)
–
Screw, exhaust heat shield M5 8 Nm (5.9 lbf ft) Loctite ® 243™