KTM 690 Enduro R AUS Скачать руководство пользователя страница 91

Страница: 91 / 190

BRAKES

–

Check the front and rear brake discs for damage, cracks, and deformation.
» If damage, cracks, or deformation are visible on the brake disc:

–

Replace the brake disc.

11.4

Checking the front brake fluid level

Warning

Danger of accidents

Failure of the brake system.

–

If the brake fluid level falls below the

MIN

mark, this indicates a leakage in the brake system or worn-out brake linings. Check

the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)

Warning

Danger of accidents

Reduced braking effect caused by old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized KTM workshop will be
glad to help.)

100253-10

–

Move the brake fluid reservoir mounted on the handlebar to a horizontal position.

–

Check the brake fluid level in the viewer



» If the brake fluid level is below the

MIN

mark:

–

Add front brake fluid.

(

p. 90)

Содержание 690 Enduro R AUS































































































































































































Результаты поиска

Содержание 690 Enduro R AUS

Отзывы:

KTM 690 Enduro R AUS, Руководство пользователя, Страница: 91 / 190

Результаты поиска

Содержание 690 Enduro R AUS

Отзывы: