KTM 690 ENDURO AUS/UK 2008, Руководство пользователя

Страница: 50 / 179

RIDING INSTRUCTIONS
48
–
For example, if the engine stalls at a junction, just pull the clutch and press the electric
starter button. You do not need to shift into neutral.
–
Switch off the engine if you expect to be standing for a long time.
–
Avoid frequent and longer slipping of the clutch. This heats the engine oil, the engine
and the cooling system.
–
Ride with a lower engine speed instead of with a high engine speed and a slipping
clutch.
–
If the FI warning lamp ( MIL ) starts to light up during the journey, stop immediately. If
you shift to neutral, the FI warning lamp ( MIL ) begins to flash.
Info
From the flash rhythm, you can deduce a two-digit number, the so-called flash
code. The flash code tells you which component is affected by a fault.
7.5
Braking
Warning
Danger of accidents If you brake too hard, the wheels can lock.
–
Adapt your braking to the traffic situation and the road conditions.
Warning
Danger of accidents Reduced braking due to wet or dirty brakes.
–
Clean or dry dirty or wet brakes by riding and braking gently.
Warning
Danger of accidents Reduced braking caused by spongy pressure point of front or rear brake.
–
Have the brake system checked in an authorized KTM workshop, and do not ride any further.