KTM 690 Duke R Скачать руководство пользователя страница 67

Страница: 67 / 193

TUNING THE CHASSIS

Info

The high-speed setting takes effect during the fast compression of the shock absorber.

602573-10

–

Turn adjusting screw



all the way clockwise with a socket wrench.

Info

Do not loosen fitting



–

Turn counterclockwise by the number of turns corresponding to the shock absorber
type.
Guideline

Compression damping, high-speed

Comfort

2 turns

Standard

1.5 turns

Sport

1 turn

Full payload

1 turn

Info

Turn clockwise to increase damping; turn counterclockwise to reduce damping
during fast compression.

10.6

Adjusting the low-speed compression damping of the shock absorber (Duke R)

Caution

Danger of accidents

Disassembly of pressurized parts can lead to injury.

–

The shock absorber is filled with high density nitrogen. Adhere to the description provided. (Your authorized KTM workshop will
be glad to help.)

Содержание 690 Duke R


































































































































































































Результаты поиска

Содержание 690 Duke R

Отзывы:

KTM 690 Duke R, Руководство пользователя, Страница: 67 / 193

Результаты поиска

Содержание 690 Duke R

Отзывы: