KTM 690 DUKE R AUS/UK Скачать руководство пользователя страница 132

Страница: 132 / 187

TUNING THE ENGINE

130

15.1

Checking the play in the throttle cable

400192-10

–

Move the handlebar to the straight-ahead position. Move the throttle grip backwards
and forwards to ascertain the play in the throttle cable.

Throttle cable play

3… 5 mm (0.12… 0.2 in)

» If the throttle cable play does not meet specifications:

–

Adjust the play in the throttle cable.

(

p. 131)

Danger

Danger of poisoning

Exhaust gases are poisonous and inhaling them may result

in unconsciousness and/or death.

–

When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.

–

Start the engine and let it run idle. Move the handlebar to and fro over the entire steer-
ing range.

The idle speed must not change.

» If the idle speed changes:

–

Adjust the play in the throttle cable.

(

p. 131)

Содержание 690 DUKE R AUS/UK




























































































































































































Результаты поиска

Содержание 690 DUKE R AUS/UK

Отзывы:

KTM 690 DUKE R AUS/UK, Руководство пользователя, Страница: 132 / 187

Результаты поиска

Содержание 690 DUKE R AUS/UK

Отзывы: