KTM 690 DUKE MAL Скачать руководство пользователя страница 94 | Manualshive

Страница: 94 / 197

KTM 690 DUKE MAL Скачать руководство пользователя страница 94

12

BRAKE SYSTEM

92

–

Replace the brake disc.

–

Check the front and rear brake discs for damage, cracks, and deformation.
» If damage, cracks, or deformation are visible on the brake disc:

–

Replace the brake disc.

12.4

Checking the brake fluid level of the front brake

Warning

Danger of accidents

Brake system failure.

–

If the brake fluid level drops below the specified marking or the specified value, this is an indication that the brake system is
leaking or that the brake linings are completely worn down. Check the brake system and do not continue riding. (Your autho-
rized KTM workshop will be glad to help.)

Warning

Danger of accidents

Reduced braking efficiency due to old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized KTM workshop will be
glad to help.)

B00946-10

(Duke)

–

Move the brake fluid reservoir mounted on the handlebar to a horizontal position.

–

Check the brake fluid level in the viewer.
» If the brake fluid has dropped below marking

A

:

–

Add front brake fluid.

x

«
...
92
93
94
95
96
...
»

Содержание 690 DUKE MAL






































































































































































































Отзывы:

Нет отзывов