KTM 690 DUKE MAL Скачать руководство пользователя страница 107

Страница: 107 / 197

WHEELS, TIRES

105

602546-10

–

Loosen screws

and

–

Unscrew screw

about six turns and press your hand on the screw to push the wheel

spindle out of the axle clamp. Remove screw

Warning

Danger of accidents

Reduced braking effect caused by damaged brake discs.

–

Always lay the wheel down in such a way that the brake discs are not dam-
aged.

–

Holding the front wheel, withdraw the wheel spindle. Take the front wheel out of the
fork.

13.2

Installing the front wheel

Warning

Danger of accidents

Reduced braking efficiency due to oil or grease on the brake discs.

–

Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.

602547-01

–

Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:

–

Replace the wheel bearing.

–

Clean, grease, and mount the left and right spacers and the shaft seal rings.

Long-life grease (

p. 188)

Содержание 690 DUKE MAL






































































































































































































Результаты поиска

Содержание 690 DUKE MAL

Отзывы:

KTM 690 DUKE MAL, Руководство пользователя, Страница: 107 / 197

Результаты поиска

Содержание 690 DUKE MAL

Отзывы: